A shower in Aurora that drips after shutoff, lurches between hot and cold or needs the lever forced usually has a worn cartridge or seal set, and a plumber can often replace those through the trim plate. A cracked or discontinued valve body is the bigger job and can mean opening the wall. Call the number on this page to be connected with a local plumber in Aurora.
Signs the valve is the problem
- A steady drip from the head or spout long after the handle is closed
- Sudden hot or cold bursts when the dishwasher starts or someone flushes
- A lever that grinds, sticks or travels past its old stopping point
- Chalky white crust around the handle, trim plate or spout
- Loose tile, soft drywall or a stain on the ceiling under the bathroom
The first four usually mean worn internal parts. The last one can mean water is escaping behind the wall, and that deserves a call before rot or mold has time to start.
Aurora water and housing
Aurora Water's report lists average hardness of about 136 ppm as calcium carbonate, with a range of roughly 87 to 198 ppm depending on which source is feeding your area. Water in that range leaves mineral deposits over the years, and inside a shower valve that tends to show up as a cartridge that binds or a temperature stop that no longer seats cleanly. The utility disinfects with chloramines, which matters for fish tanks and some filters more than for how a valve is repaired.
The housing stock varies a lot across a city this large. Older neighborhoods in the northwest, around the original Fletcher townsite, can have early single-lever or two-handle valves whose parts take some hunting. The master-planned communities out along E-470 mostly have current pressure-balancing valves with parts on supply house shelves.
What drives the price
- The failed part. A cartridge or O-ring kit is far less labor than a new valve body.
- Brand and model. A valve still in production can be fixed with stock parts; a discontinued one may force a replacement.
- Access. A removable panel behind the shower saves time. Solid tile on both sides means cutting and patching.
- Mineral buildup. A cartridge cemented in by scale takes longer to pull without damaging the body.
- Permit. The City of Aurora Building Division reviews plumbing work, so ask whether your job needs a permit.
When you call
The number connects you with an independent plumber who works in Aurora. Say what the shower is doing, roughly how old the bathroom is, and whether a brand name shows on the handle. If water won't stop, close the main shutoff in the house first. For a main break or a problem on the utility side, Aurora Water answers at 303.326.8645 during business hours and 303.739.6772 after hours.
Shower Valve Repair questions in Aurora
Can hard water or mineral scale make a shower valve stick?
Does the disinfectant in our tap water change anything about a shower valve repair?
Why does the shower turn scalding or icy when someone flushes or runs water elsewhere?
When is a new cartridge enough, and when does the whole valve have to go?
More plumbing services in Aurora
Shower Valve Repair nearby
Helpful guides
Sources
Last updated: